135W RGBW (9 x 15W) CREE LEDs – 13° Beam Angle
Total LED power: 135W
Luminous Flux: 3350Lm
Emittance (@2m): 10350Lx
Beam Angle: 13 ˚
供电Battery: LG Chem Lithium-ion
Battery Lifetime: 70% after 300 cycles
Battery Runtime: Up to 20 hours
Charging time (nominal): 7 Hours
Input Voltage: 90-264V 47-63Hz
Input current: 2A/115VAC ~1.0A/230VAC
Inrush current: 70A/230VAC
控制Wireless Modules: 865-870MHz | 902-928MHz | 2.4GHz
Range: 300m | 330 Yards
Wired DMX: not supported
Wireless DMX: CRMX & others, excluding W-DMX G5, City Theatrical
IP Rating: IP65
Relative humidity: 0-100%
Operating Temperature: 0-40 ˚C | 32-104 ˚F
Weight: 7.98kg |17.5Lbs
Dimensions: 279 x 296 x 253mm | 10.9 x 11.6 x 9.9 (inch)
尺寸：L279 x W253 x H296mm
9 x 15W RGBW CREE LEDs,
13° Beam angle, 3350 lm
Create complex programs out of colors, effects and settings. The lights will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which Tube should receive commands.
Keep a complete overview over the status and all settings of your lights while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual lights and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if lights are controlled via DMX.
Set Up Faster
Set up your lights conveniently out of the distance.
Set DMX address and DMX footprint for one or several Helios, Hyperion, Titan Tube or Spotlights; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings and the lights are ready for the next event.
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
The AX10 SpotMax and all Astera Battery Powered PAR carry the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.