Titan LED Engine, 15W, CRMX + Wired DMX
Say hello to our next-generation multi-purpose light. In addition to being a battery-powered uplight and spotlight with 5 different beam options, multiple PixelBricks can be connected to form clusters and shapes. With about 10cm edge length and 1kg weight, it is small and lightweight while still featuring a powerful output of high-quality light which meets the highest demands of film, TV and stage clients.
光学Order Code: PB15
LED Engine: Titan LED Engine
Colors: RGB Mint Amber
Total LED Power: 15W
Power Draw: 12W
Light output: 2700K, 3200K, 5500K:* 388lm, 450lm, 375lm
CRI(Ra)/TLCI 3200-6500K*: ≥96
Beam Angle: 13°
Strobe: 0 – 25Hz
供电Battery Lifetime: 70 % after 300 cycles
Battery Runtime: up to 20 hours
Charging Time (nominal): 4 hrs
Input Voltage: 24VDC
Input Current: 0.8A
控制Wired DMX: Yes (via PWB-2-86)
CRMX Receiver: Built-in
Wireless Frequencies: CRMX 2.4GHz, UHF,
Range (m/yds): 300 / 330yds
IP Rating: IP65
Ambient Temperature (°C/°F): 0°- 40° / 32°- 104°
Weight (kg/lbs): 1.12 kg / 2.47 lbs
Dimensions (mm/inches): 91 x 91 x 94 / 3.6 x 3.6 x 3.7
Combine several units
into a cluster
Create shapes using
Backside display with
dedicated Color and
Filters and Dome create
different beams and
Direct App Control
(No AsteraBox required)
Create complex programs out of colors, effects, and settings. PixelBrick will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which Tube should receive commands.
Keep a complete overview of the status and all settings of your PixelBrick while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual PB15 PixelBrick and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if PB15 PixelBrick is controlled via DMX.
Set Up Faster
Set up your Film Light conveniently out of the distance.
Set DMX address and DMX footprint for one or several PB15 PixelBrick; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
We included the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.